Doctoral Program
Checklist Print

PhD Student Checklist

 

 
First Week Print

 

Mechanical Engineering and Engineering Science

 

SCHEDULE OF ACTIVITIES FOR NEW GRADUATE STUDENTS

FALL 2009

 

Day

Time

Event/Activity

Who Should Attend?

August 20, 2009

Thursday

9:00am – 12:00pm

International Graduate Student Orientation (Attendance Required for F-1 and J-1 Students),  College of Health and Human Services (CHHS) Room 281

Ms. Marian Beane, Director

Ms. Denise Medeiros, Assistant Director

New International Graduate Students

 

2:00pm – 2:30pm

Overview of Graduate Programs (Attendance Required), Duke 324

Dr. Harish Cherukuri, Graduate Coordinator and Professor

New Domestic and International Graduate Students

 

2:30pm – 3:00pm

Overview of Department Resources, Financial Information/Employment, and General Announcements (Attendance Required), Duke 324
Ms. Tracy Beauregard, Student Services Specialist

New Domestic and International Graduate Students

 

3:00pm – 5:00pm

Individual Advising and Registration Assistance Available/Building Tours

Dr. Harish Cherukuri, Duke 389

Ms. Tracy Beauregard, Duke 382

New Domestic and International Graduate Students

August 21, 2009

Friday

9:00am – 12:00pm

Orientation for International Teaching Assistants (Attendance Required for NEW ITA’s Only), College of Health and Human Services (CHHS) Room 281

New International Graduate Students with a Teaching Assistantship

 

9:00am – 3:00pm

International Teaching Assistant Testing (Required), CHHS 279

New International Graduate Students with a Teaching Assistantship

 

3:00pm

Make-up Orientation for International Graduate Students (Required for F-1 and J-1 Students), CHHS 279

New International Graduate Students (only if unable to attend Thursday’s orientation)

August 22, 2009

Saturday

9:00am – 12:30pm

Graduate School Orientation (Attendance Encouraged), Student Activity Center (SAC) 3rd Floor Salons

UNC Charlotte Graduate School

Refreshments, giveaways, and information about campus resources and programs.

New Domestic and International Graduate Students

 

1:00pm – 4:00pm

Make ups for ITA English Language Assessment, CHHS 279

 

August 24, 2009

Monday

First Day of Classes

TBA

TBA

I-9 Employment Session for International Students, TBA

 

September 2, 2009

Thursday

Registration/Add/Drop Deadline

 


 
Forms Print
 
Financial Aid Print

Teaching Assistantships

The department offers several teaching assistantships and tuition scholarships (in-state and out-of-state). Teaching assistantships require the student to work 20 hours per week helping the faculty in the conduct of undergraduate laboratory experiments, grading of papers and occasional classroom teaching. The assistantships are generally for the academic year (August 15th to May 15th). The University pays students once per month and the first check will arrive on the last working day of September.

Research Assistantships

Research Assistantships are generally given by the faculty with research funding. In most cases students also receive funding during the summer.

Research Fellowships

The University offers the following research fellowships. The Department nominates students for the following University fellowships.
  • Giles Fellowship.
  • Stone Fellowship.
  • Everett Fellowship.
  • William States Lee Scholar
  • Cameron Applied Research Center Fellow.
  • Precision Metrology Fellowships.

Tuition Waivers

In-state and Out-of-State tuition waivers are available, on a competitive basis, to full time students with financial assistantships from UNC Charlotte.

The Graduate School has compiled a comprehensive list of funding resources available to students; please visit their website: http://graduateschool.uncc.edu/funding.html

 
Qualifying Exam Print

After completing two semesters in the PhD program, every student will take qualifying exams in math and two topical areas, selected by the student and his/her dissertation committee. The student and committee will select 4 out of the 9 subjects in the math syllabus for the math qualifying exam. The student will be tested on these 4 subjects.  The student must answer all the questions in these 4 subjects and obtain 70% or above to pass.

The student and the committee will select the two areas for the topical exams.  70% or above is the passing grade in the two topic areas. 

For each of the three exams, two outcomes are possible:  Pass (70% or more) or Fail (<70%). If the student passes all three of the exams, the student must present his thesis topic proposal to his/her dissertation committee in the semester following the semester in which the qualifying exam is taken. If the student fails any or all of the exams in the first attempt, then he/she will either be allowed to retake the failed exam(s) or terminated from the program.  If the student fails any exam for the second time, this is sufficient grounds for termination from the program.  

Click the links below for syllabus and example papers

Topic

Syllabus

Sample Exam

Applied Optics

Syllabus

Sample Exam

Sample Exam Minor

Bioengineering

Syllabus

Sample Exam

Controls

Syllabus

Sample Exam Minor

Dynamics

Syllabus

Sample Exam

Fluid Mechanics

Syllabus

Sample Exam

Heat Transfer

Syllabus

Sample Exam

Instrumentation

Syllabus

Sample Exam

Manufacturing

Syllabus

Sample Exam

Machine DesignSyllabus Sample Exam
Material ScienceSyllabusSample Exam

Metrology

Syllabus

Sample Exam

Numerical Methods

Syllabus

Sample Exam

Operations Research

Syllabus

Sample Exam

Software Engineering

Syllabus

Sample Exam

Solid Mechanics

Syllabus

Sample Exam

Mathematics

Syllabus

Sample Exam(Based on the Old Syllabus)
Sample Exam(Based on the New Syllabus)

 
Program Requirements Print

Degree Requirements

  1. Appointment of a Ph.D. advisor and formation of an advisory committee.
  2. Development of a Ph.D. Plan of Study detailing all course and examination requirements.
  3. Successful completion of the written qualifying examination.
  4. Presentation of a proposal for Ph.D. research and admission to candidacy.
  5. Successful defense of the Ph.D. Dissertation.

Within the first semester of being admitted into a Ph.D. program, the student should choose a Ph.D. advisor and form an advisory committee. In conjunction with the Ph.D. advisor and this advisory committee, the student will develop a Plan of Study to meet the Ph.D. program requirements of course work and examinations and prepare to undertake original research leading to a dissertation of a quality that would be acceptable for publication of articles in peer-refereed professional journals.

Plan of Study

The Plan of Study must show at least 72 hours of credit beyond the baccalaureate degree including at least 45 hours of course work, and 18 hours of research/dissertation credits. For students who do not possess appropriate bachelor's and/or master's degrees in engineering, additional coursework will be expected. The specific course requirements will be set by the student's advisory committee, but must include:
  • At least 6 hours of graduate (6000-level or above) mathematics.
  • At least 18 hours of MEES coursework. Graduate (6000-level or above) courses from outside the department may be taken, but must be approved by the Graduate Coordinator as part of the student's Plan of Study.

Residence

A student may satisfy the residency requirement for the program by completing 18 hours, either course work or research credits, by study-in-residence during the academic year and during the summer terms, as long as the study is continuous. Study-in-residence is deemed to be continuous if the student is enrolled in one or more courses (including research/dissertation credit) in successive semesters until eighteen hours of credit are earned.

Grades

A student is expected to achieve A's or B's in all course work taken for graduate credit and must have a GPA of at last a 3.0 in order to graduate. The dissertation is graded on a Pass/Unsatisfactory basis and, therefore, will not be included in the cumulative average. An accumulation of more than two marginal C grades will result in termination of the student's enrollment in the graduate program. If a student makes a grade of U in any course, enrollment will be terminated. A graduate student whose enrollment has been terminated because of grades is ineligible to attend any semester or summer session unless properly readmitted to the graduate program. Readmission to the program requires approval of the Dean of the Graduate School upon the recommendation of the student's major department and the Engineering Doctoral Graduate Committee of the College of Engineering.

Qualifying Examination

After completing two semesters in the PhD program, every student will take qualifying exams in math and two topical areas, selected by the student and his/her dissertation committee. The student and committee will select 4 out of the 9 subjects in the math syllabus for the math qualifying exam. The student will be tested on these 4 subjects.  The student must answer all the questions in these 4 subjects and obtain 70% or above to pass.

 

The student and the committee will select the two areas for the topical exams.  70% or above is the passing grade in the two topic areas.

 

For each of the three exams, two outcomes are possible:  Pass (70% or more) or Fail (<70%). If the student passes all three of the exams, the student must present his thesis topic proposal to his/her dissertation committee in the semester following the semester in which the qualifying exam is taken. If the student fails any or all of the exams in the first attempt, then he/she will either be allowed to retake the failed exam(s) or terminated from the program.  If the student fails any exam for the second time, this is sufficient grounds for termination from the program.

Admission to Candidacy Requirements

The single requirement for admission to candidacy is the appointment of an advisory committee. This committee will consist of at least four graduate faculty members. Two of these four members shall be from a department other than the student's major. One of these external members shall be chosen by the student in consultation of his graduate advisor and the other member is appointed by the graduate school. The graduate advisor serves as chair of the committee. The committee is recommended by the department after appropriate consultation between the advisor and student.

Dissertation Proposal and Admission to Candidacy

Because the Ph.D. program is heavily based on independent research, each student must write a proposal describing his/her proposed dissertation research following the technical guidelines established by the department. Upon approval of the student's dissertation proposal, the advisory committee will recommend the student's admission to candidacy. This is subject to the approval of the Dean of the Graduate School.

Upon completion of a substantial amount of graduate work and in no case later than two weeks prior to the beginning of the semester in which the student expects to complete all requirements for the degree, the student shall file for Admission to Candidacy on a form supplied by The Graduate School. This application is a checklist approved by the advisor, department chair, and the College Dean listing all coursework to be offered for the degree (including transfer credit and courses in progress). A tentative date for the dissertation defense should be agreed upon by the candidate and chair and indicated on this application. The date should be realistic and allow ample time for completion and review of the thesis or project.

Dissertation

Evidence of a high degree of competence in scholarship, written exposition, independent inquiry and the ability to organize and apply knowledge must be demonstrated by the student in the dissertation. The student will make a public defense of the dissertation at which time the dissertation, as well as the student's knowledge of the field, will be appropriate matter for examination by the student's advisory committee. Although questions may be asked by the general audience, evaluation of the dissertation defense is the sole responsibility of the advisory committee. The dissertation will be graded on a Pass/Unsatisfactory basis.

Transfer Credit

Although the maximum amount of credit past the baccalaureate degree that a Ph.D. student may transfer towards a doctorate is 30 semester hours, only courses appropriate for the approved program and curriculum in which the student is enrolled may be transferred. Please consult with the Graduate Coordinator and/or Student Services Specialist for assistance with transfer credit.

Appropriate courses should be determined by the student's supervisory committee and approved by the Graduate Coordinator before the request is submitted to the Graduate School. This rule applies whether the courses were taken at UNC Charlotte or elsewhere and whether a master's degree was earned or not. However, no more than six hours taken when the student was in post-baccalaureate (non-degree seeking) status may be applied toward the doctoral degree.

The grade in any course accepted for transferred credit must be "A" or "B" as defined by UNC Charlotte. Courses that have been graded on a Pass/No Credit or Satisfactory/Unsatisfactory basis will not be accepted for transfer. Please refer to the following regulations in the Graduate Catalog regarding transferred credit: http://graduateschool.uncc.edu/images/stories/catalogs/GraduateCatalog2009-2010.pdf

Time Limit

Students are allowed a maximum of eight (8) calendar years from formal admission to the Ph.D. program to complete the program successfully.

Graduate Advisors

Graduate students are expected to select their advisors by the end of first semester. The Graduate Program Coordinator will assist students who wish to find a suitable match. Students may consult the list of graduate faculty to identify research interests.

 
<< Start < Prev 1 2 Next > End >>

Page 1 of 2

COE HOME